3D Nord QMS 1060, Начало работы

Страница: 48 / 110

Introduction
QMS 1060 Print System Getting Started
3-2
Introduction
This chapter explains what an interface is, describes how to connect
your printer to a Macintosh (or another computer on a network that
uses LocalTalk-type connectors and boxes).
Using an Optional Network Interfaces
In addition to the three standard interfaces—LocalTalk, parallel (bidi-
rectional), and serial—the QMS 1060 Print System has the option of
using two optional interfaces to connect your printer to an Ethernet or
Token-Ring network.
If you have purchased an optional interface for your printer, refer to
the following for more information:
n
If you’ve purchased an optional network interface for the printer,
see chapter 6, “Printer Options,” of the
Reference guide as well
as the documentation that comes with the interface for installation
instructions.
n
The documentation that comes with the optional network inter-
face contains information about all other options in the network
interface menu as well as instructions for connecting the printer to
the network and for printing over the network.
n
Your application and network documentation contain information
on printing over the network.
Using the LocalTalk Interface
Connecting to the LocalTalk port involves basically three steps:
assembling the proper interface cabling (use a LocalTalk-type kit such
as Farallon's PhoneNET, available from your QMS vendor), making
the connection, and making sure the necessary printing files are
installed on the Macintosh.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500