3D Nord QMS 1060, Начало работы

Страница: 22 / 110

Printer
Features
QMS 1060 Print System Getting Started 1-20
Remote Console
The 1060 Print System printer allows you to establish a remote con-
sole connection via TCP/IP Telnet, and you can additionally use Net-
Ware, EtherTalk, and LAN Manager/LAN Server to establish this
connection, if you have the optional CrownNet interface installed.
Printer status conditions that require user intervention display on the
remote console. For example, status messages may indicate that
paper is low, output bin is full, or a paper jam has occurred. (Refer to
the
QMS CrownNet Interface System Administrator’s Guide for infor-
mation on how to start the session, and refer to the QMS Crown
Remote Console User’s Guide for complete information on using a
remote console to control and configure the printer.)
User Benefit—The ability to control your printer from a remote con-
sole as well as from the printer’s own control panel means you don’t
have to leave your work station whenever the printer needs attention.
Moreover, it means you’ll know right away if the printer is tied up with
a jam or other simple problem requiring user intervention.
PCMCIA Card Slot
A PCMCIA (Personal Computer Memory Card International Associa-
tion) card slot is available to support Release 1 and 2, Type I, II and III
cards.
User Benefit—This card slot allows you to use optional fonts or emu-
lations (see “Printer Options,” in the following section).
Printer Options
The following options are available for your QMS 1060 Print System.
Contact your QMS vendor for purchase information.
Upgradable RAM (Random Access Memory)
The 8 megabytes (MB) of resident RAM (Random Access Memory) is
upgradable to 64 MB through the installation of Single In-line Memory
Modules (SIMMs).
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500