3D Nord QMS 1060, Начало работы

Страница: 57 / 110

Using the
LocalTalk
Interface
3-11 Connecting to a Macintosh
Testing Macintosh Communication
You can check communication between the printer selected in the
Chooser and the Macintosh by sending a file to the printer from an
application (see your application documentation for more information)
or by printing a directory, as described here:
1 Display a disk or folder window.
2 Set up page information.
Choose Page Setup from the File menu. Select paper size, print-
ing orientation, and any other necessary options. Then select OK.
3 Print a directory or a window.
a Choose Print Directory or Print Window from the File menu. A
dialog box appears.
b Select the printing options you want; then click OK. If no page
prints, check chapter 6, “Troubleshooting,” of the
Operation
guide .
Printing from the Macintosh
You're now ready to print from your Macintosh. From this point, you'll
probably perform most printing tasks from your application. For
specific information, check the printing section in your application
documentation.
For information on print media types and sizes, see chapter 2, “Print
Media,” in the
Reference guide.
A Note for Users of Aldus Applications
If you use an Aldus application (or one that used to be owned by
Aldus, such as Adobe PageMaker or MacroMedia FreeHand), when
you want to print, hold down the Option key while selecting Print from
the File menu. This brings up the LaserWriter windows, which con-
tains the QMS printing options. Normally, Aldus applications bypass
LaserWriter and use an Aldus printer driver, which prevents you from
accessing QMS printing options.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500