3D Nord QMS 1060, Начало работы

Страница: 71 / 110

PC Printing
Software
4-13 Connecting to a PC
6 In the Add Unlisted or Updated Printer dialog box, select the
appropriate printer:
n
If you’re using the QMS Level 2 Windows printer driver, select
your printer (for example, QMS 1060 Level 2) from the list of
printers, and choose OK.
n
Otherwise, select QMS PostScript Printer, and choose OK.
» Note: If you see the message
Insert Microsoft
Windows 3.1 Disk #5 or a disk with the
updated SSERIFF.FON file in...
, choose Cancel.
7 When QMS 1060 Level 2 appears in the list of printers,
choose the Connect button to configure the printer port.
8 In the Connect dialog box, select the appropriate computer
port in the Ports list, and then choose OK.
9 Choose the Setup button to configure the printer’s default
settings:
n
If you’re using the QMS Level 2 Windows printer driver, on
the setup tabs select the appropriate default settings.
n
Otherwise, in the PostScript Printer on xxx dialog box, select
your printer (for example, QMS 1060) in the Printer drop-
down list box, and select the appropriate default settings.
10 Choose OK to return to the Printers dialog box.
11 Choose Set As Default Printer to make the QMS printer the
default printer.
12 Repeat steps 3-10 to install the QMS driver for other ports, or
choose Close to exit from the Printers dialog box.
Now you can set printer options from your application by choosing
Print Setup from the application’s File menu and then choosing the
Options button. Choose the Help button in any of the driver dialog
boxes for information on driver options.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500