3D Nord QMS 1060, Начало работы

Страница: 45 / 110

Printing a
Start-up Page
2-19 Setting Up Your Printer
If a start-up page does not print, see chapter 6, “Troubleshooting,” of
the
Operation guide for more information on printing a start-up page.
M
WARNING!
Turn the printer off and unplug the power cord before
checking for correct printer installation.
ACHTUNG!
Schalten Sie bitte den Drucker aus und ziehen Sie auch
den Netzstecker heraus, bevor Sie die korrekte Installation des
Druckers überprüfen.
Enabling/Disabling the Start-up Page
A start-up page automatically prints when you turn on your print sys-
tem. However, you can save time, paper, and toner by disabling the
start-up page.
If you need the information included on the start-up page after you
have disabled the page (for example, to provide to the QMS Cus-
tomer Technical Assurance staff when you need technical support.
The two easiest ways to disable (and enable) the start-up page are
1 Use the PS Executive Series Utilities.
(See the PS Executive Series Utilities on-line help for complete
information.)
2 Use the printer control panel (Administration/Startup
Options/Do Start Page menu).
See “Enabling/Disabling the Start-up Page” in chapter 4, “Printer
Configuration,” of the
Reference guide for complete information.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500