3D Nord QMS 1060, Начало работы

Страница: 69 / 110

PC Printing
Software
4-11 Connecting to a PC
PC Printing Software
If you're replacing a PostScript printer, you can probably start printing
now with the printing software already in place. Refer to your applica-
tion documentation for instructions on sending documents to the
printer.
However, if you want to be able to use all your printer's special fea-
tures (like collation, 600x600 dpi printing, and gamma correction), or
if you've never printed to a PostScript printer before, we recommend
you take a few minutes to make sure you have the following printing
software installed:
n
PS Executive Series Utilities
n
A PostScript printer driver
n
Printer description files (if you use QuarkXPress 3.3, Aldus Page-
Maker, or Adobe PhotoShop)
Installing PS Executive Series Printer Utility
Software
PS Exec, included on the DOS format disks we shipped with your
printer, is a utilities program for controlling the printer from the PC. For
example, through PS Exec you can turn off the start-up page, rename
the printer, download fonts, print font samples, and manage hard
disks. Many of the procedures described in this manual involve using
PS Exec. The README file on the PS Executive disk explains how to
install the program, and the on-line help explains how to use it.
Installing a PostScript Printer Driver
If you're using Windows, we recommend that you install the
QMS-developed Windows driver, which is on the disk called Windows
Drivers (shipped with the printer). Instructions for installing and acti-
vating the driver are in the next section.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500