3D Nord QMS 1060, Начало работы

Страница: 38 / 110

Installing
Consumables
QMS 1060 Print System Getting Started 2-12
Loading the 500-Sheet Cassette
The QMS 1060 Print System comes standard with one 500-sheet let-
ter/A4 cassette. The printer automatically pulls media from the cas-
sette. Load media in the cassette as follows:
» Note: You should ensure that the media size matches the cassette
size; otherwise, the printed image will not be correctly placed on the
page.
1 Unwrap the paper, pull the stack out, and then with one hand
at each end of the stack, lift and hold it in a curved position
as shown in the following illustration.
» Note: Paper is packed in reams of 500 sheets. Do not unpack the
paper above the printer as this might cause particles to fall into
the printer components. Note the arrows on the wrapper. They
show which side of the paper should be on top when it is loaded
in the cassette.
Hold
Without
Gripping
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500