3Com MSR 50 Series, Руководство по настройке

Страница: 431 / 2443

Configuring ISDN 431
Configuring the Sliding
Window Size on the PRI
Interface
Follow these steps to configure the size of the sliding window on the PRI interface:
Configuring Statistics
About ISDN Message
Receiving/Sending
Follow these steps to configure the statistics about ISDN message
receiving/sending:
Configuring to Check
the Calling Number
When an Incoming Call
Comes
Follow these steps to configure to check the calling number when an incoming
call comes:
Configure ISDN B channel
ascending or descending
selection mode isdn bch-select-way
{ ascending | descending }
Optional
ISDN B channel ascending selection
mode is adopted by default. When
the switch manages B channel, this
command takes no effect. (For
more information about
configuring local management
ISDN B channel, refer to
“ISDN
Configuration” on page 421 ).
To do... Use the command... Remarks
To do... Use the command... Remarks
Enter system view system-view -
Enter specified interface view interface interface-type
interface-number
-
Configure the sliding window
size on the PRI interface or
restore the default. isdn pri-slipwnd-size
{ window-size | default }
Optional
The sliding window on the PRI
interface defaults to 7.
To do... Use the command... Remarks
Enter system view system-view -
Enter specified interface view interface interface-type
interface-number
-
Set ISDN to start the statistics of
message receiving/sending isdn statistics start Required
Set ISDN to stop the statistics of
message receiving/sending isdn statistics stop Required
Display ISDN statistics isdn statistics display [ flow ] Required
Set ISDN to continue the statistics
of information received by ISDN isdn statistics continue Optional
Clear ISDN statistics isdn statistics clear Optional
To do... Use the command... Remarks
Enter system view system-view -
Enter specified interface view interface interface-type
interface-number
-
Configure to check the calling
number when an incoming
call comes isdn caller-number
caller-number
Required
Execute this command to
configure limited incoming
calls.