3Com MSR 50 Series, Руководство по настройке

Страница: 1931 / 2443

SSH Server Configuration Example 1931
SSH Server
Configuration
Example
When Using Password
Authentication
Network requirements
■
The host (SSH client) and the router (SSH server) are directly connected through
Ethernet interfaces.
■
The host runs SSH2.0 client software to securely log on to the router for
configuration.
■
Password authentication is used.
Network diagram
Figure 559 Network diagram for SSH server configuration (using password
authentication)
Configuration procedure
1
Configure the SSH server
# Generate RSA and DSA key pairs and enable SSH server
<Router> system-view
[Router] public-key local create rsa
[Router] public-key local create dsa
[Router] ssh server enable
# Configure an IP address for interface Ethernet 1/1, which the SSH client will use
as the destination for SSH connection.
[Router] interface ethernet 1/1
[Router-Ethernet1/1] ip address 192.168.1.40 255.255.255.0
[Router-Ethernet1/1] quit
# Set the authentication mode for the user interface to AAA.
Display the status information or
session information of an SSH
server display ssh server { status |
session }
Available in any
view
Display the mappings between
host public keys and SSH servers
saved on a client display ssh server-info Available in any
view
Display information about a
specified or all SSH users on the
SSH server display ssh user-information
[ username ]
Available in any
view
To do... Use the command... Remarks
SSH client SSH server
Host Router
192.168.1.56/24
Eth1/1
192.168.1.40/24