3Com MSR 50 Series, Руководство по настройке

Страница: 1638 / 2443

1638 C
HAPTER
84: T
RAFFIC
C
LASSIFICATION
, P
OLICING
,
AND
S
HAPING
Configuration example for Line Rate on physical interface
Configure outbound line rate on interface Ethernet1/0 to 500 kbps.
# Enter system view.
<Sysname> system-view
# Enter interface view
[Sysname] interface ethernet1/0
# Configure line rate parameter, and configure the outbound cir to 500 kbps.
[Sysname-Ethernet1/0] qos lr outbound cir 500
Displaying and
Maintaining
TP/TS/Rate Limiting
Configure layer 2 interface
module LR qos lr { inbound
|outbound } cir
committed-information-rate
[ cbs committed-burst-size
[ ebs excess-burst-size ] ]
Required
For a device which cannot be
installed with an external
interface module, or when
the number of the interfaces
on a layer 2 module is 4 or 9,
inbound , cbs and ebs are
not supported; if the number
of interfaces on a layer 2
module is 16, 24, or 48,
ebs
is not supported on the
module and
cbs defaults to
4096 bytes.
Enter port group view port-group aggregation
agg-id
-
Configure port group LR qos lr { inbound
|outbound } cir
committed-information-rate
[ cbs committed-burst-size
[ ebs excess-burst-size ] ]
Required
Port group is supported if the
number of interfaces on a
layer 2 module is 16, 24 or
48.
The default value is the same
as that of the layer 2 interface
module.
Display LR configuration and
statistics on interface display qos lr interface
[ interface-type
interface-number ]
The display command can be
executed in any view.
To do... Use the command... Remarks
To do... Command Remarks
Display TP rules display qos carl [ carl-index ] Available in
any view
Display TP information on an interface display qos car interface
[ interface-type interface-number ]
Display the TS information on a
interface display qos gts interface
[ interface-type interface-number ]
Display rate limiting configuration on
an interface and the related statistics
information display qos lr interface
[ interface-type interface-number ]