3Com MSR 50 Series, Руководство по настройке

Страница: 2419 / 2443

Configuring Voice RADIUS 2419
n
Pay attention to the following points when configuring the number of redial
attempts
■
For the card number/password process, the number of redial attempts applies
to each dial step, including selecting a language option, and dialing a card
number, password, or called number.
■
The redialtimes command is used to configure the number of redial attempts.
Therefore, the number of dial attempts is the number of redial attempts plus 1.
For example, if the number of redial attempts is n (redialtimes-number = n),
then the number of dial attempts is n + 1.
Enabling Language
Selection Function
The language selection function applies to only the caller number process with
IVR. With the language selection function enabled, the voice gateway will play
tones to prompt for a language first and then a called number after a user dials an
access number.
Configuration prerequisites
You have configured an access number and entered access number view.
Configuration procedure
Follow these steps to configure the language options:
Enter dial program view dial-program -
Enter access number view gw-access-number
access-number
-
Specify the two-stage dialing process
as card number/password process or
caller number process with IVR process-config cardnumber or
process-config voice-caller
Required
Configure the number of redial
attempts redialtimes redialtimes-number Required
3 by default.
To do... Use the command... Remarks
To do... Use the command... Remarks
Enter system view system-view -
Enter voice view voice-setup -
Enter dial program view dial-program -
Enter access number view gw-access-number
access-number
-
Specify the two-stage dialing
process as caller number
process with IVR process-config voice-caller Required
Configure the language
options selectlanguage { enable |
chinese | english }
Required
Chinese by default. After a
user dials the access number,
the voice gateway plays tones
in Chinese to prompt for a
called number.