3Com MSR 50 Series, Руководство по настройке

Страница: 1673 / 2443

Token Function of QoS 1673
RTP PQ Configuration
Example
Network requirement
Configure RTP queuing on the interface and set the maximum reserved bandwidth
allocated for RTP priority queue to 70% of the available bandwidth.
Configure RTP priority queuing on the serial port Serial1/0. The starting port
number is 16384. The ending port number is 32767. The RTP packets use 64 kbps
bandwidth. If network convergence happens, the packets will enter RTP priority
queue.
Configuration procedure
# Enter system view
<Sysname> system-view
# Enter interface view
[Sysname] interface serial1/0
# Set the maximum reserved bandwidth allocated for RTP priority queue to 70%
of the available bandwidth.
[Sysname-Serial1/0] qos reserved-bandwidth pct 70
# Configure RTP priority queuing on the serial port Serial1/0. The starting port
number is 16384. The ending port number is 32767. The RTP packets use 64 kbps
bandwidth. If network convergence happens, the packets will enter RTP priority
queue.
[Sysname-serial2/0] qos rtpq start-port 16384 end-port 32767 bandwidth 64
Token Function of QoS
Configuring QoS Token When FTP is used to transfer data, the upper layer protocol such as TCP provides
the flow control function. This can however cause the configuration of CQ and
WFQ, if they are configured, to lose effect. This function provides a flow control
To do... Use the command... Remarks
Enter system view system-view -
Enter interface view interface interface-type
interface-number
-
Apply RTP queue qos rtpq start-port
first-rtp-port-number
end-port
last-rtp-port-number
bandwidth bandwidth [ cbs
cbs ]
Required
Configure the maximum
reserved bandwidth
percentage of the available
bandwidth qos reserved-bandwidth
pct
percent
Optional
It is 80 percent by default.
Display configuration statistics
for the interface RTP queue display qos rtpq interface
[ interface-type |
interface-number ]
Optional
The display command can be
executed in any view.