360 Systems V2000 Series, Руководство по эксплуатации, Страница: 61 / 117

System Configuration
=
55
SYSTEM CONFIGURATION
The Image Server 2000 provides a wide range of configuration settings, so that its behavior can be
tailored to a specific application. Each group of settings is associated with usage; generally, there
are two types:
System settings that configure the server in a global sense, and Channel settings that
configure individual video channels. Channel configuration settings are further separated into Input
and Output groups.
Setup configuration menus can be accessed from the
Main Menu > Configure
choice.
System
Open this dialog window to configure general control parameters, such as GPI, sync, time
code, serial control and networking. See
System Configuration below for more information.
Date/Time
Open this dialog window to set the Image Server internal system date and time. This
information will be used to time stamp the data files of new recordings. All channels must be
idle to change the Date/Time setting.
Channels
Select a video channel from this dropdown menu to configure channel-specific audio, video,
and time code parameters. For more information about changing channel setups, see Channel
Configuration on page 60.
Many options are presented on a single screen. Some choices logically exclude others. When
making certain selections, other selections may become available, unavailable, or have
different range limits. Options that become unavailable will be grayed out.
To accept changes made to the configuration dialog box, click
Apply
. Click
OK
to accept
changes and close the configuration dialog window. Click
Cancel
to close the window and
discard any changes. Changes will become effective when the channel starts the next (new)
recording.