360 Systems V2000 Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 117

background image

14

•

Image Server 2000

Rack Mounting

Refer to instructions packaged with the Rack Mount Hardware Kit for specific installation
information.
Note: If you plan to use digital audio, be sure to change the configuration of the Analog/Digital
Audio Jumpers inside the unit before mounting the Image Server in a rack. The jumpers are factory
set to the Analog audio position. For more information about changing the jumpers, see

Analog/Digital Audio Selection on page 82.
There are four adhesive-backed rubber feet on the Image Server 2000, which may be removed
when rack mounting the unit.
Generally, the Image Server will be mounted in a 19” rack enclosure having 10-32 tapped holes.
The Image Server can be adapted to rack enclosures having untapped round or square holes by
using the nuts and washers included with the mounting kit.
Cables attached to the rear of the Image Server should be supported by the rack mounting rails.
Do not support substantial cable weight from the Image Server.
Keep the air vent slots on the sides of the Image Server free of obstructions.
Remove the front panel to expose the rack screw slots. Fasten the Image Server into the rack using
10-32 flat-head Phillips screws (provided). Replace the front panel. Tighten the front panel access

screws.

Software

The Image Server is shipped with its operating system and application programs already installed.
The first time that the Image Server 2000 is started, it must be connected to a keyboard, monitor
and mouse. The Image Server will ask you to accept the licensing agreement before it will allow

any operation. This screen will only appear during the initial startup, or until accepted.
THE CD-ROM SUPPLIED IS ONLY FOR USE IN REINSTALLING THESE PROGRAMS. DO NOT
LEAVE IT IN THE CD-ROM DRIVE.
If for any reason it becomes necessary to reinstall any software, refer to the

Maintenance

chapter

for instructions.
The CD-ROM drive is intended only for installing software. It may not be used to load video or
audio program content.

«
...
18
19
20
21
22
...
»

Содержание V2000 Series






















































































































Отзывы:

Нет отзывов

Похожие инструкции для V2000 Series

Univerge SV8100

Бренд: NEC Страницы: 2

Бренд: Kaleidescape Страницы: 11

Бренд: Panasonic Страницы: 16

Бренд: US Robotics Страницы: 36

Бренд: TYAN Страницы: 106

Бренд: HPE Страницы: 58

SUPERSERVER 5014C-MT

Бренд: Supero Страницы: 112

Бренд: RaidSonic Страницы: 2

Ultra Enterprise 3000

Бренд: Sun Microsystems Страницы: 48

Бренд: D-Link Страницы: 32

Бренд: D-Link Страницы: 22

DP-313 - Air 802.11b Wireless Print Server

Бренд: D-Link Страницы: 28

Бренд: D-Link Страницы: 64

D DP-301P+ DP-301P+

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 100

AirPlus G DP-G301

Бренд: D-Link Страницы: 88

Бренд: D-Link Страницы: 37

Бренд: D-Link Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды