360 Systems V2000 Series, Руководство по эксплуатации

Страница: 38 / 117

32
=
Image Server 2000
This control plays the current clip in varispeed mode from 0 to ±2x (including a detent at
±1x). Because the shuttle control uses varispeed algorithms, even 1x varispeed may appear
to occasionally skip frames.
The Shuttle control slider works in three basic ways: Snap-Back to still, Hold Speed, and
Mouse Wheel.
•
In Snap-Back operation, click and drag the slide control to change speed. Releasing the
slider bar will let it snap back to zero speed, or still.
•
For Hold Speed operation, position the cursor over the slider control scale (not the slider
arrow) and click the left mouse button to increment the speed control. The transport will
run in the selected direction at the selected speed without holding the mouse button
down. The cursor may now be moved over the Stop button to wait for the desired point.
•
When using a scroll mouse, position the cursor over the slider control scale and rotate
the wheel to increment speed. Rolling the wheel in opposite directions changes the
direction the arrow slider moves. To stop video, click the Stop button or the arrow
slider.
Jog Buttons
The
Jog +
command will move to the next frame and go to Still. The
Jog -
command will
move to the previous frame and go to Still.
GoTo Buttons
In Edit mode, click the arrows (
|<
,
>|
) to go to the next trim point (Mark In or Mark Out) in
the selected direction. An additional click in the selected direction will go to SOM or EOM.
In Play mode, click
|<
or
>|
to go to Mark In and Mark Out points within the clip.
Keyboard Shortcuts
Many transport control and edit related functions can be performed by keyboard commands.
A complete list of these appears in Appendix C.