E. Settings
Model AQSync Air Quality Monitoring Station Manual Rev. A-1
33
The remote operation of the AQSync is accomplished via a Modbus TCP/IP interface
through an Ethernet connection to your computer. The Modbus communication and
control feature is accessed from the System Settings screen shown here:
This feature of the AQSync is currently under development at 2B Technologies.
E.7.4
Date Format
This screen enables you to select the format for the date. Adjustments, if needed,
should be done prior to beginning a measurement period. This is the date that appears
on the AQSync touchscreen and is incorporated in the data stream.
E.7.5
Wi-Fi Settings
Choose a Wi-Fi network for your data uploads. This works in conjunction with the
Uploads Settings screen, which enables you to select whether Wi-Fi or Cellular is used,
or to prioritize one of these. Adjustments should be made prior to beginning a
measurement period. See Section C.5 for the description of this setting.
E.7.6
Power Settings
Here, the whole system, or individual components of the system, can be turned on or
off by clicking on the current setting. In addition, specific operating hours can be made
for each individual instrument. These capabilities are useful for example if there are
situations when data are not needed, or in prioritizing measurements in order to
conserve power consumption.
The “Show Extra” button brings up the status of the
pumps, fan and heater in the AQSync. Pump 1 is the ozone/CO/VOCs/CO2 modules
’
pump; Pump 2 is the NOx module pump; Pump 3 is currently unassigned.
