C. Quick Start: Initiating Measurements
Model AQSync Air Quality Monitoring Station Manual Rev. A-1
16
C.2.7
Battery Charging
A small battery provides the boost needed for the data communication of the AQSync.
This battery is located on the printed circuit board that contains the CO sensors and the
communication/GPS components. As the AQSync is warming up, this battery will
charge and become ready for data communication.
Summary
Allow ~30 minutes of warmup to ensure that the full measurement suite of the
AQSync is valid. The data communication battery also charges during warmup.
C.3
Real-Time Data Viewing on the Touchscreen
C.3.1
Main Screen
Users can view the AQSync data on the Main screen of
instrument’s touchscreen. Each
measured species in the chemistry suite can be viewed individually by selecting the
species in the left-hand side of the Main screen:
If your AQSync
has the VOCs
sensor option, its
display is found in
the Ozone
submenu, as
shown here.
