![1010music Blackbox 3.0 Скачать руководство пользователя страница 102](http://html1.mh-extra.com/html/1010music/blackbox-3-0/blackbox-3-0_user-manual_3044332102.webp)
Copyright 1010music LLC 2023
Page 102 of 123
Blackbox 3.0 User Manual
80
81
82
83
B5
76
77 78
79
72
73 74
75
68
G#4
69 70
71
MIDI Notes to
Trigger Pad
Recording
Note:
►
Some devices map the MIDI note numbers one octave lower. The
mapping here assumes C4 is Note 60.
►
If you want to configure lengths for each pad independently, make
sure you have RecConfig set to Per Pad (
TOOLS
- > Rec).
►
If you have the same MIDI channel (or Omni) for both MIDI Pads and
MIDI Keys, you will trigger both playback of the pad via MIDI Keys
mode, and the MIDI Pads mapping action when you trigger a MIDI
note into blackbox. This may be fun to do, but you may want to use
separate MIDI channels if you don’t want to trigger MIDI Keys and MIDI
pads behavior with the same controller.
►
The Novation Launch Pad controllers work well with blackbox when the
LaunchPad is configured in
Drum mode
. With the default note
mapping, the bottom left quadrant of the LaunchPad triggers pads,
the bottom right quadrant triggers recording, the top left quadrant
triggers sequences, and the top right quadrant clears pads. When in
the correct mode, the Launchpad lights the buttons using the color
pattern shown in the diagram pattern below.
If you have RecToPlay set to ON (you’ll find it in
TOOLS
- > Rec) and have specified a
recording length, the pad will start playing as soon as recording is finished.
While recording, MIDI Clear notes and MIDI Action notes will be ignored.
To Trigger Recording to a Specific Pad Using MIDI:
1.
Set up blackbox for MIDI Triggered Recording as described
above.
2.
Press the MIDI Note that maps to the pad you want to record
into, as shown in the map on the right.
Blackbox will jump to the
PADS
screen and select the corresponding
pad. If the pad is empty, you will see the recording screen and recording
will begin, the same as if you had pressed the
REC
+
PLAY
transport
buttons. Any armed Clips will start to play.
Recording will end when:
■ you press the corresponding MIDI Note again,
■ when the recording reaches the length specified in the recording settings, or
■ when you press the
STOP
transport button.