ZyXEL Communications ZyXEL ZyWALL P1, User Manual

Page: 176 / 369

ZyWALL P1 User’s Guide
Chapter 10 Certificates 175
10.17 Add or Edit a Directory Server
Click CERTIFICATES , Directory Servers to open the Directory Servers screen. Click
Add (or the details icon) to open the following screen. Use this screen to configure
information about a directory server that the ZyWALL can access.
Figure 75 Certificates: Directory Server: Add
Table 60 Certificates: Directory Servers
LABEL DESCRIPTION
PKI Storage Space
in Use
This bar displays the percentage of the ZyWALL’s PKI storage space that is
currently in use. When you are using 80% or less of the storage space, the bar is
green. When the amount of space used is over 80%, the bar is red. When the bar
is red, you should consider deleting expired or unnecessary certificates before
adding more certificates.
# The index number of the directory server. The servers are listed in alphabetical
order.
Name This field displays the name used to identify this directory server.
Address This field displays the IP address or domain name of the directory server.
Port This field displays the port number that the directory server uses.
Protocol This field displays the protocol that the directory server uses.
Modify Click the details icon to open a screen where you can change the information
about the directory server.
Click the delete
icon to remove the directory server entry. A window displays
asking you to confirm that you want to delete the directory server. Note that
subsequent certificates move up by one when you take this action.
Add Click Add to open a screen where you can configure information about a directory
server so that the ZyWALL can access it.