ZyXEL Communications ZyXEL ZyWALL P1, User Manual

Page: 205 / 369

ZyWALL P1 User’s Guide
204 Chapter 13 Remote Management
Figure 100 SSH Example 2: Test
2 Enter
ssh –1 192.168.167.1
. This command forces your computer to connect to the
ZyWALL using SSH version 1. If this is the first time you are connecting to the
ZyWALL using SSH, a message displays prompting you to save the host information of
the ZyWALL. Type
yes
and press [ENTER] .
Then enter the password to log in to the ZyWALL.
Figure 101 SSH Example 2: Log in
3 The CLI prompt displays next.
13.10 Secure FTP Using SSH Example
This section shows an example on file transfer using the OpenSSH client program. The
configuration and connection steps are similar for other SSH client programs. Refer to your
SSH client program user’s guide.
1 Enter
sftp –1 192.168.167.1
. This command forces your computer to connect to
the ZyWALL for secure file transfer using SSH version 1. If this is the first time you are
connecting to the ZyWALL using SSH, a message displays prompting you to save the
host information of the ZyWALL. Type
yes
and press
[ENTER]
.
2 Enter the password to login to the ZyWALL.
3
Use the
put
command to upload a new firmware to the ZyWALL.
$ telnet 192.168.167.1 22
Trying 192.168.167.1...
Connected to 192.168.167.1.
Escape character is '^]'.
SSH-1.5 -1.0.0
$ ssh –1 192.168.167.1
The authenticity of host '192.168.167.1 (192.168.167.1)' can't
be established.
RSA1 key fingerprint is
21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.167.1' (RSA1) to the list
of known hosts.
Administrator@192.168.167.1's password: