ZyXEL Communications ZyXEL ZyWALL P1, User Manual

Page: 213 / 369

ZyWALL P1 User’s Guide
212 Chapter 13 Remote Management
If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not
do any configurations directly to the ZyWALL (using either the web configurator or
commands) without notifying the Vantage CNM administrator.
13.17 Configuring CNM
Vantage CNM is disabled on the ZyWALL by default. Click REMOTE MGMT in the
navigation panel and then click the CNM tab.
Figure 109 CNM
The following table describes the labels in this screen.
Table 77 CNM
LABEL DESCRIPTION
Registration
Information
Registration Status This read only field displays Not Registered when Enable is not selected.
It displays Registering when the ZyWALL first connects with the Vantage
CNM server and then Registered after it has been successfully registered
with the Vantage CNM server. It will continue to display Registering until it
successfully registers with the Vantage CNM server. The ZyWALL will not be
able to register with the Vantage CNM server if:
•
The Vantage CNM server is down.
• The Vantage CNM server IP address is incorrect.
• The Vantage CNM server is behind a NAT router or firewall that does not
forward packets through to the Vantage CNM server.
• The encryption algorithms and/or encryption keys do not match between
the ZyWALL and the Vantage CNM server.