ZyXEL Communications ZyAIR G-3000, User Manual

Page: 205 / 222

ZyAIR G-3000 User’s Guide
Appendix I Log Descriptions 206
Use
sys logs category
followed by a log category and a parameter to decide what to record
Use the
sys logs save
command to store the settings in the ZyAIR (you must do this in order to
record logs).
Displaying Logs
Use the
sys logs display
command to show all of the logs in the ZyAIR’s log.
Use the
sys logs category display
command to show the log settings for all of the log categories.
Use the
sys logs display [log category]
command to show the logs in an individual ZyAIR log
category.
Use the
sys logs clear
command to erase all of the ZyAIR’s logs.
Log Command Example
This example shows how to set the ZyAIR to record the error logs and alerts and then view the results.
ras> sys logs load
ras> sys logs category error 3
ras> sys logs save
ras> sys logs display access
# .time source destination
notes
message
0|11/11/2002 15:10:12 |172.22.3.80:137
|172.22.255.255:137 |ACCESS BLOCK
Table 84 Log Categories and Available Settings
LOG CATEGORIES AVAILABLE PARAMETERS
error 0, 1, 2, 3
mten 0, 1
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only alerts for that
category, and 3 to record both logs and alerts for that category.