ZyXEL Communications ZYAIR G-1000, User Manual

Page: 37 / 197

ZyAIR G-1000 Access Point User’s Guide
System Screens 4-3
If you forget your password (or the ZyAIR IP address), you will need to reset the ZyAIR. See the Resetting
the ZyAIR section in for details.
Figure 4-2 Password
The following table describes the labels in this screen.
Table 4-2 Password
LABEL DESCRIPTION
Old Password Type in your existing system password (1234 is the default password).
New Password Type your new system password (up to 31 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Retype your new system password for confirmation.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to reload the previous configuration for this screen.
4.4 Setting the Time
To set the time and date on your ZyAIR, click ADVANCED , SYSTEM and then the Time Setting tab. The
screen appears as shown.