ZyXEL Communications ZYAIR G-1000, User Manual

Page: 124 / 197

ZyAIR G-1000 Access Point User’s Guide
16-4 System Information and Diagnosis
Table 16-2 Menu 24.2.1 System Maintenance: Information
FIELD DESCRIPTION
Name Displays the system name of your ZyAIR. This information can be changed in
Menu 1 – General Setup .
Routing Refers to the routing protocol used.
ZyNOS F/W Version Refers to the ZyNOS (ZyXEL Network Operating System) system firmware
version. ZyNOS is a registered trademark of ZyXEL Communications
Corporation.
Country Code Refers to the country code of the firmware.
LAN
Ethernet Address Refers to the Ethernet MAC (Media Access Control) address of your ZyAIR.
IP Address This is the IP address of the ZyAIR in dotted decimal notation.
IP Mask This shows the subnet mask of the ZyAIR.
DHCP This field shows the DHCP setting of the ZyAIR. DHCP is not available for the
ZyAIR.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
16.2.2 System Maintenance- Information
Enter 2 in menu 24.2 to display the screen shown next. You can set up different port speeds for the console
port through Menu 24.2.2 – System Maintenance – Console Port Speed . Your ZyAIR supports 9600
(default), 19200, 38400, 57600 and 115200bps. Use [
SPACE BAR
] and then
[ENTER]
to select the
desired speed in menu 24.2.2, as shown in the following figure.
Figure 16-5 Menu 24.2.2 System Information: Change Console Port Speed
16.3 Log and Trace
Your ZyAIR provides the error logs and trace records that are stored locally.
Menu 24.2.2 - System Maintenance - Information
Console Port Speed: 9600
Press ESC or RETURN to Exit: