ZyXEL Communications ZYAIR G-1000, User Manual

Page: 188 / 197

ZyAIR G-1000 Access Point User’s Guide
K-2 Log Descriptions
Chart 21 System Maintenance Logs
LOG MESSAGE DESCRIPTION
TELNET Login Fail Someone has failed to log on to the router via telnet.
FTP Login
Successfully
Someone has logged on to the router via FTP.
FTP Login Fail Someone has failed to log on to the router via FTP.
NAT Session Table is
Full!
The maximum number of NAT session table entries has been
exceeded and the table is full.
Chart 22 UPnP Logs
LOG MESSAGE DESCRIPTION
UPnP pass through
Firewall
UPnP packets can pass through the firewall.
Chart 23 ICMP Notes
TYPE CODE DESCRIPTION
0 Echo Reply
0 Echo reply message
3 Destination Unreachable
0 Net unreachable
1 Host unreachable
2 Protocol unreachable
3 Port unreachable
4 A packet that needed fragmentation was dropped because it was set to Don't
Fragment (DF)
5 Source route failed
4 Source Quench