ZyXEL Communications ZYAIR G-1000, User Manual

Page: 136 / 197

ZyAIR G-1000 Access Point User’s Guide
17-10 Firmware and Configuraiton File Maintenance
17.4.5 Example: TFTP Command
The following is an example TFTP command:
TFTP [-i] host put firmware.bin ras
where “i” specifies binary image transfer mode (use this mode when transferring binary files), “host” is the
ZyAIR’s IP address, “put” transfers the file source on the computer (firmware.bin – name of the firmware
on the computer) to the file destination on the remote host (ras - name of the firmware on the ZyAIR).
Commands that you may see in third party TFTP clients are listed earlier in this chapter.
TFTP over WAN will not work if you have applied a filter in menu 11.5 (WAN) to block Telnet service.