ZyXEL Communications ZyAIR B-5000, User Manual

Page: 88 / 287

ZyAIR B-5000 User’s Guide
8-2 Configuration Parameters
The following table describes the labels in this screen.
Table 8-1 Basic Configuration Parameters
LABEL DESCRIPTION
General Parameters
MAX User Enter the maximum number of users allowed. The ZyAIR supports a maximum of 5
administrators.
Telnet Port Enter the console listening port, 23 is the factory default.
Console Port Enter the console port of your computer (either COM1 or COM2). If you forget your
password (or the ZyAIR IP address), you will need to reset the ZyAIR or upload the
default configuration file via console. See the
Telnet and Console chapters in this
User’s Guide for information on resetting.
User Profile
ID Select the ID radio button to allow you to add, delete or modify a user profile.
User Name This shows the username defined by the user in Figure 8-2 .
Privilege Level This shows the level of administrator access in the user profile and relates to telnet
commands:
•
1: User Mode – enables you to view system information and ping a computer from
the ZyAIR.
•
2: Root Mode – enables you to change to supervisor mode, see chapter
Supervisor Mode in Part VI of this User’s Guide .
•
3: Configure Mode – enables you to change the configuration in supervisor mode,
see chapter
Supervisor Mode in Part VI of this User’s Guide .
•
Unlimited: unlimited privileges – enables all modes.
Max Screen Line This shows the maximum number of characters allowable (greater than 13 but less
than or equal to 24).
Show Mode This is set as Menu or Command Mode and affects the number of menus shown to
the user; see the Console and Telnet chapters in this User’s Guide .
Keyboard Type Indicates the type of keyboard interface used ( VT100, ANSI, Linux or X Window ).
Client Address The IP address of the client interface.
Add Click Add button to add user profile parameters to the selected ID profile.
Delete Click
Delete button to remove user profile parameters from the selected ID profile.
Modify Click Modify button to change user profile parameters in an existing selected ID
profile.