ZyAIR B-5000 User’s Guide
21-4
Configuration Scenarios
Figure 21-2 Wireless Access Router with PPP over Ethernet (PPPoE)
21.1.3
Configure the ZyAIR as a Wireless Access Router with Dynamic IP
Address (DHCP Client)
Step 1.
Select
ACCESS POINT
as the operating mode, click
NEXT
.
Step 2.
Click
ADVANCED CONFIG
.
Step 3.
Select
BRIDGING
.
Step 4.
Click
Disable
for
Bridge Function
.
Step 5.
Click
FINISH
.
Step 6.
Click
BASIC CONFIG
.
Step 7.
Select
Interface Parameters
.
Step 8.
Click a radio button and select
MODIFY
to choose the interface that you want to change.
Step 9.
In interface 1, ensure that the wireless interface
Status
is
Active
and enter the
IP address
and
wireless interface
Net Mask
that is suitable for your wireless network. Turn
NAT (PAT) ‘off’
.
Step 10.
In interface 2, Ensure that the ethernet interface
Status
is set to
Active
. The other parameters
will be obtained automatically by DHCP from your network environment. Turn
NAT (PAT)
‘on’
.
Step 11.
Click the
OK
button to return to the
Interface Parameters
window.
Summary of Contents for ZyAIR B-5000
