manualshive.com logo in svg

ZyXEL Communications XMG3512-B10A, User Manual

The ZyXEL Communications XMG3512-B10A comes with a comprehensive Quick Start Manual to guide users through the setup process effortlessly. This valuable manual is available for free download from our website, ensuring easy access to detailed instructions and ensuring you get the most out of your product.

Share
Download
background image

Chapter 2 The Web Configurator

XMG3512-B10A User’s Guide

28

Routing

Static Route

Use this screen to view and set up static routes on the XMG.

DNS Route

Use this screen to forward DNS queries for certain domain names through 
a specific WAN interface to its DNS server(s).

Policy Route

Use this screen to configure policy routing on the XMG.

RIP

Use this screen to configure Routing Information Protocol to exchange 
routing information with other routers.

QoS

General

Use this screen to enable QoS and traffic prioritizing. You can also 
configure the QoS rules and actions.

Queue Setup

Use this screen to configure QoS queues.

Classification 
Setup

Use this screen to define a classifier.

Shaper Setup

Use this screen to limit outgoing traffic rate on the selected interface.

Policer Setup

Use this screen to configure QoS policers.

NAT

Port Forwarding

Use this screen to make your local

 

servers visible to the outside world.

Applications

Use this screen to configure servers behind the XMG.

Port Triggering

Use this screen to change your XMG’s port triggering settings.

DMZ

Use this screen to configure a default server which receives packets from 
ports that are not specified in the 

Port Forwarding

 screen.

ALG

Use this screen to enable or disable SIP ALG.

Address Mapping Use this screen to change your XMG’s address mapping settings.

Sessions

Use this screen to configure the maximum number of NAT sessions each 
client host is allowed to have through the XMG.

DNS

DNS Entry

Use this screen to view and configure DNS routes.

Dynamic DNS

Use this screen to allow a static hostname alias for a dynamic IP address.

Vlan Group

Vlan Group

Use this screen to group and tag VLAN IDs to outgoing traffic from the 
specified interface.

Interface 

Grouping

Interface 
Grouping

Use this screen to map a port to a PVC or bridge group.

USB Service

File Sharing

Use this screen to enable file sharing via the XMG.

Media Server

Use this screen to use the XMG as a media server.

Security

Firewall

General

Use this screen to configure the security level of your firewall.

Protocol

Use this screen to add Internet services and configure firewall rules.

Access Control

Use this screen to enable specific traffic directions for network services.

DoS

Use this screen to activate protection against Denial of Service (DoS) 
attacks.

MAC Filter

MAC Filter

Use this screen to block or allow traffic from devices of certain MAC 
addresses to the XMG.

Parental 

Control

Parental Control

Use this screen to block web sites with the specific URL.

Scheduler Rules

Scheduler Rules

Use this screen to configure the days and times when a configured 
restriction (such as parental control) is enforced.

Certificates

Local Certificates  Use this screen to view a summary list of certificates and manage 

certificates and certification requests.

Trusted CA

Use this screen to view and manage the list of the trusted CAs.

Table 4   Navigation Panel Summary (continued)

LINK

TAB

FUNCTION

Summary of Contents for XMG3512-B10A






































































































































































































































































































Reviews:

No comments

Related manuals for XMG3512-B10A

SMC Sierra Monitor FieldServer ProtoNode Recovery Manual preview
FieldServer ProtoNode
Brand: SMC Sierra Monitor Pages: 4
Nitgen Fingkey Access User Manual preview
Fingkey Access
Brand: Nitgen Pages: 36
H3C MSR2600-10-X1 Quick Start Manual preview
MSR2600-10-X1
Brand: H3C Pages: 4
Carotron GTW-MB-MBTCP Instruction Manual preview
GTW-MB-MBTCP
Brand: Carotron Pages: 20
ZyXEL Communications N4100 Brochure & Specs preview
N4100
Brand: ZyXEL Communications Pages: 6
Multi-Tech RouteFinder RF550VPN User Manual preview
RouteFinder RF550VPN
Brand: Multi-Tech Pages: 76
Intel II User Manual preview
II
Brand: Intel Pages: 96
Nice FIBARO HC3-001 User Manual preview
FIBARO HC3-001
Brand: Nice Pages: 24
TECOM IG6600 Quick Installation Manual preview
IG6600
Brand: TECOM Pages: 5
Magnum Energy MagWeb GT Owner'S Manual preview
MagWeb GT
Brand: Magnum Energy Pages: 34
IBM WebPoint Installation Card preview
WebPoint
Brand: IBM Pages: 11
IBM 22P6415 User Manual preview
22P6415
Brand: IBM Pages: 62
Forum SENTRY Quick Start Manual preview
SENTRY
Brand: Forum Pages: 20
URC Total Control TRF-ZW10 Owner'S Manual preview
Total Control TRF-ZW10
Brand: URC Pages: 44
Syris SY120SA-V5EM Operation Manual preview
SY120SA-V5EM
Brand: Syris Pages: 16
RTA 460BMSTCP-NNA1 Product User Manual preview
460BMSTCP-NNA1
Brand: RTA Pages: 86
NAPCO iSeeVideo ISEE-SCHGW Installation Manual preview
iSeeVideo ISEE-SCHGW
Brand: NAPCO Pages: 20
ICC Mirius Installation Instructions Manual preview
Mirius
Brand: ICC Pages: 56

Brands by name

Popular brands

Load more brands