manualshive.com logo in svg

ZyXEL Communications XMG3512-B10A, User Manual

The ZyXEL Communications XMG3512-B10A comes with a comprehensive Quick Start Manual to guide users through the setup process effortlessly. This valuable manual is available for free download from our website, ensuring easy access to detailed instructions and ensuring you get the most out of your product.

Share
Download
background image

XMG3512-B10A User’s Guide

172

C

HAPTER

 14

Interface Grouping

14.1  Overview

By default, all LAN and WAN interfaces on the XMG are in the same group and can communicate with 
each other. Create interface groups to have the XMG assign the IP addresses in different domains to 
different groups. Each group acts as an independent network on the XMG. This lets devices connected 
to an interface group’s LAN interfaces communicate through the interface group’s WAN or LAN 
interfaces but not other WAN or LAN interfaces.

14.1.1  What You Can Do in this Chapter

The 

Interface Grouping

 screens let you create multiple networks on the XMG (

Section 14.2 on page 172

).

14.2  The Interface Grouping Screen

You can manually add a LAN interface to a new group. Alternatively, you can have the XMG 
automatically add the incoming traffic and the LAN interface on which traffic is received to an 
interface group when its DHCP Vendor ID option information matches one listed for the interface group. 

Use the 

LAN

 screen to configure the private IP addresses the DHCP server on the XMG assigns to the 

clients in the default and/or user-defined groups. If you set the XMG to assign IP addresses based on the 
client’s DHCP Vendor ID option information, you must enable DHCP server and configure LAN TCP/IP 
settings for both the default and user-defined groups. See 

Chapter 8 on page 111

 for more information.

In the following example, the client that sends packets with the DHCP Vendor ID option set to MSFT 5.0 
(meaning it is a Windows 2000 DHCP client) is assigned the IP address 192.168.2.2 and uses the WAN 
VDSL_PoE/ppp0.1 interface.

Figure 98   

Interface Grouping Application

Default: ETH 2~4

192.168.1.x/24

192.168.2.x/24

VDSL_PoE/ppp0.1

eth10.0

DHCP Vendor ID option: MSFT 5.0

Summary of Contents for XMG3512-B10A






































































































































































































































































































Reviews:

No comments

Related manuals for XMG3512-B10A

Linksys SPA400 Administration And Configuration Manual preview
SPA400
Brand: Linksys Pages: 13
Handlink Technologies WG-500P M User Manual preview
WG-500P M
Brand: Handlink Technologies Pages: 156
Patton SmartNode 4940 Series User Manual preview
SmartNode 4940 Series
Brand: Patton Pages: 59
Datapulse Intuition 1000 Operator Training Manual preview
Intuition 1000
Brand: Datapulse Pages: 26
ZyXEL Communications P-873HNU(B)-51B Quick Start Manual preview
P-873HNU(B)-51B
Brand: ZyXEL Communications Pages: 12
Tadiran Telecom aeonix TGW4 User Manual preview
aeonix TGW4
Brand: Tadiran Telecom Pages: 141
Ubee DDW366 Safety And Installation Manual preview
DDW366
Brand: Ubee Pages: 7
SpectraLink MOG500 Installation And Setup preview
MOG500
Brand: SpectraLink Pages: 15
Aruba EC-10104 Installation Manual preview
EC-10104
Brand: Aruba Pages: 20
ViewSonic viewstick 2 User Manual preview
viewstick 2
Brand: ViewSonic Pages: 58
EnOcean Dolphin USB 500T Preliminary User'S Manual preview
Dolphin USB 500T
Brand: EnOcean Pages: 11
Avaya G600 Installing Manual preview
G600
Brand: Avaya Pages: 274
Aaeon SRG-IMX8P User Manual preview
SRG-IMX8P
Brand: Aaeon Pages: 57
FältCom 252236 User Manual preview
252236
Brand: FältCom Pages: 20
ICP DAS USA GRP-520 User Manual preview
GRP-520
Brand: ICP DAS USA Pages: 82
Oki BV1250 Technical Reference preview
BV1250
Brand: Oki Pages: 198
Lantronix PREMIERWAVE XC HSPA+ Quick Start Manual preview
PREMIERWAVE XC HSPA+
Brand: Lantronix Pages: 2
Industrial Scientific RGX Product Manual preview
RGX
Brand: Industrial Scientific Pages: 62

Brands by name

Popular brands

Load more brands