manualshive.com logo in svg

ZyXEL Communications XMG3512-B10A, User Manual

The ZyXEL Communications XMG3512-B10A comes with a comprehensive Quick Start Manual to guide users through the setup process effortlessly. This valuable manual is available for free download from our website, ensuring easy access to detailed instructions and ensuring you get the most out of your product.

Share
Download
background image

 Chapter 8 Home Networking

XMG3512-B10A User’s Guide

113

• Assigning lease times to mappings

Windows Messenger is an example of an application that supports NAT traversal and UPnP. 

See the  for more information on NAT.

Cautions with UPnP

The automated nature of NAT traversal applications in establishing their own services and opening 
firewall ports may present network security issues. Network information and configuration may also be 
obtained and modified by users in some network environments. 

When a UPnP device joins a network, it announces its presence with a multicast message. For security 
reasons, the XMG allows multicast messages on the LAN only.

All UPnP-enabled devices may communicate freely with each other without additional configuration. 
Disable UPnP if this is not your intention. 

UPnP and Zyxel

Zyxel has achieved UPnP certification from the Universal Plug and Play Forum UPnP™ Implementers 
Corp. (UIC). Zyxel's UPnP implementation supports Internet Gateway Device (IGD) 1.0. 

See 

Section 8.4.1 on page 119

 for examples of installing and using UPnP.

Finding Out More

See 

Section 8.9 on page 123

 for technical background information on LANs.

8.1.3  Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to the DHCP Client List 
screen.

8.2  The LAN Setup Screen

Use this screen to set the Local Area Network IP address and subnet mask of your XMG. Click 

Network 

Setting > Home Networking

 to open the

 LAN Setup 

screen. 

Follow these steps to configure your LAN settings.

1

Enter an IP address into the 

IP Address 

field. The IP address must be in dotted decimal notation. This will 

become the IP address of your XMG.

2

Enter the IP subnet mask into the 

Subnet Mask 

field. Unless instructed otherwise it is best to leave this 

alone, the configurator will automatically compute a subnet mask based upon the IP address you 
entered.

Summary of Contents for XMG3512-B10A






































































































































































































































































































Reviews:

No comments

Related manuals for XMG3512-B10A

Xylem optimyze Manual preview
optimyze
Brand: Xylem Pages: 24
Billion SG6200NXL Quick Start Manual preview
SG6200NXL
Brand: Billion Pages: 35
CHERUBINI METAHome Instructions Manual preview
METAHome
Brand: CHERUBINI Pages: 16
AudioCodes MediaPack 114 Configuration Manual preview
MediaPack 114
Brand: AudioCodes Pages: 5
Patton SmartNode SN4150 User Manual preview
SmartNode SN4150
Brand: Patton Pages: 80
VisionNet M605N User Manual preview
M605N
Brand: VisionNet Pages: 102
AVIRE 452 003/M Installation Manual preview
452 003/M
Brand: AVIRE Pages: 41
Adman Technologies DH-1 User Manual preview
DH-1
Brand: Adman Technologies Pages: 26
digitalSTROM dSS-IP Operation & Settings Manual preview
dSS-IP
Brand: digitalSTROM Pages: 27
SSS Siedle SET CLVSG 850-1 Product Information preview
SET CLVSG 850-1
Brand: SSS Siedle Pages: 32
ABB 150047915 Quick Start Manual preview
150047915
Brand: ABB Pages: 11
Telecom FM OneStream BRI Programming Manual preview
OneStream BRI
Brand: Telecom FM Pages: 79
SolarEdge SE1000 Installation Manual preview
SE1000
Brand: SolarEdge Pages: 49
Alcatel-Lucent OmniAccess 8550 Installation Manual preview
OmniAccess 8550
Brand: Alcatel-Lucent Pages: 98
AMX NXB-CCG-K NetLinx Clear Connect Installation Manual preview
NXB-CCG-K NetLinx Clear Connect
Brand: AMX Pages: 2
AMX NXR-ZGW-PRO Operation/Reference Manual preview
NXR-ZGW-PRO
Brand: AMX Pages: 5
AMX NetLinx NXR-ZGW Operation/Reference Manual preview
NetLinx NXR-ZGW
Brand: AMX Pages: 42
AMX NetLinx NXR-ZGW-PRO Operation/Reference Manual preview
NetLinx NXR-ZGW-PRO
Brand: AMX Pages: 46

Brands by name

Popular brands

Load more brands