Chapter 11 Network Address Translation (NAT)
XMG3512-B10A User’s Guide
158
The following table describes the labels in this screen.
11.5 The DMZ Screen
In addition to the servers for specified services, NAT supports a default server IP address. A default server
receives packets from ports that are not specified in the
NAT Port Forwarding Setup
screen.
Figure 84
Network Setting > NAT > DMZ
The following table describes the fields in this screen.
Table 60 Port Triggering: Configuration Add/Edit
LABEL
DESCRIPTION
Active
Select to enable or disable this rule.
Service Name
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
WAN Interface
Select a WAN interface for which you want to configure port triggering rules.
Trigger Start Port The trigger port is a port (or a range of ports) that causes (or triggers) the XMG to record the IP
address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Trigger End Port
Type a port number or the ending port number in a range of port numbers.
Trigger Protocol
Select the transport layer protocol from
TCP
,
UDP
, or
TCP/UDP
.
Open Start Port
The open port is a port (or a range of ports) that a server on the WAN uses when it sends out a
particular service. The XMG forwards the traffic with this port (or range of ports) to the client
computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Open End Port
Type a port number or the ending port number in a range of port numbers.
Open Protocol
Select the transport layer protocol from
TCP
,
UDP
, or
TCP/UDP
.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Table 61 Network Setting > NAT > DMZ
LABEL
DESCRIPTION
Default Server
Address
Enter the IP address of the default server which receives packets from ports that are not
specified in the
NAT Port Forwarding
screen.
Note: If you do not assign a
Default Server Address
, the XMG discards all packets
received for ports that are not specified in the
NAT Port Forwarding
screen.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Summary of Contents for XMG3512-B10A
