ZyXEL Communications WX3401-BO User Manual Download Page 121

Page: 121 / 180

Chapter 9 Multicast Status

WX3401-B0 User’s Guide

121

settings in

Network Setting > MLD Status

. To open this screen, click

System Monitor > Multicast Status

MLD Status

Figure 60

System Monitor > Multicast Status > MLD Status

The following table describes the labels in this screen.

Table 28 System Monitor > Multicast Status > MLD Status

LABEL

DESCRIPTION

Refresh

Click this button to update the status on this screen.

Interface

This field displays the name of the WX3401-B0’s interface that belongs to an MLD multicast group.

Multicast Group

This field displays the address of the MLD multicast group to which the interface belongs.

Summary of Contents for WX3401-BO





















































































































































































Search results

Summary of Contents for WX3401-BO

Reviews:

Related manuals for WX3401-BO

Brands by name

Popular brands

ZyXEL Communications WX3401-BO, User Manual

Search results

Summary of Contents for WX3401-BO

Reviews:

Related manuals for WX3401-BO

Brands by name

Popular brands