Chapter 2 Hardware
WX3401-B0 User’s Guide
21
Figure 15
Screw Specifications
1
Select a position free of obstructions on a wall strong enough to hold the weight of the device.
2
Mark two holes on the wall at the appropriate distance apart for the screws.
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
Figure 16
Wall Mounting Distance
3
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the full
depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way in - leave
a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the screws all
the way in - leave a gap of about 0.5 cm.
4
Make sure the screws are fastened well enough to hold the weight of the WX3401-B0 with the
connection cables.
5
Align the holes on the back of the WX3401-B0 with the screws on the wall. Hang the WX3401-B0 on the
screws.
Summary of Contents for WX3401-BO
