ZyXEL Communications Prestige 28641, User Manual

Page: 79 / 159

Dial-In Configuration 65
•
None - No authentication required.
3. PPP Options: Mutual Authen. - Some vendors, e.g. Cisco,
implement a type of mutual authentication. That is, the node that
initiates the call will request a user name and password from the far
end that they are dialing to. If the Remote Node that is dialing in
implements this type of authentication, set this field to Yes.
4. PAP Login - This field will only be enabled if the Mutual Authen.
field is set to Yes. Enter in the login name to be used to respond to
the far end’s PAP authentication request. This field does not apply
to CHAP authentication.
5. PAP Password - This field will only be enabled if the Mutual
Authen. field is set to Yes. Enter in the PAP password to be used
to respond to the far end’s authentication request. This field does
not apply to CHAP authentication.
6. Multiple Link Options: Max Trans Rate - Enter the maximum
data transfer rate between your Prestige and the Remote Dial-in
User. The unit is in bits per second. There are two options for this
field:
•
64 - At most, one B channel will be used.
•
128 - A maximum of two channels can be used.
When the Prestige calls back to the Remote Dial-in User the
maximum data transfer rate is always 64.
7. Callback Budget Management: Allocated Budget (min) - This
field will set a budget callback time for all the Remote Dial-in Users.
The default for this field is 0 for no budget control.
8. Callback Budget Management: Period (hr) - This field will set
the time interval to reset the above callback budget control.
9. Dial-In IP Address Supplied By : Dial-in User - If set to Yes, it
tells the Prestige to allow a remote host to specify its own IP