ZyXEL Communications Prestige 28641, User Manual

Page: 101 / 159

Novell IPX Configuration 87
Figure 8-6 Menu 12.2 - Edit IPX Static Route
1. Server Name - In this field, enter in the name that has been
configured for the server. This name must be the exact name
configured in the NetWare server.
2. Network # - This field contains the internal network number of the
remote server which you wish to access. Do not use 00000000 or
FFFFFFFF for this field.
3. Node # - This field contains the address of the node on which the
server resides. If you are using a Novell IPX implementation, this
value is 000000000001.
4. Socket # - This field contains the socket number on which the
server will receive service requests. The default for this field is hex
0451.
5. Type # - This field identifies the type of service the server provides.
The default for this field is hex 0004.
6. Gateway Node - In this field, enter the number (1-4) of the
Remote Node that is linked to this static route. That is, the Remote
Node that you wish to route the packet to.
The Hop Count and Tick Count fields have the same meaning as those
in the Remote Node Setup.