60 Remote Node Configuration
5.
Multiple Link Options: Max Trans Rate -
Enter the maximum
data transfer rate allowed for this Remote Node. This parameter is
in kilobits per second. There are two options for this field:
•
64
- At most one channel can be used.
•
128
- A maximum of two channels can be used.
6.
Multiple Link Options: Target Utility
- Enter the two thresholds
separated by a - for subtracting and adding the second channel. The
default is 32-48.
7.
Multiple Link Options: Add Persist
- This parameter specifies
the number of seconds there traffic is above the adding threshold
before the Prestige will bring up the second channel. The default is 5
seconds.
8.
Multiple Link Options: Subtract Persist
- This parameter
specifies the number of seconds where traffic is below the
subtraction threshold before the Prestige drops the second channel.
The default is 5 seconds.
Once you have completed Menu 11.2 - Remote Node PPP Options,
press
ENTER
at the message: Press ENTER to Confirm ... to confirm
your selections, or press
ESC
to cancel your selections.
Summary of Contents for Prestige 28641
