ZyXEL Communications Prestige 2602HW Series, User Manual

Page: 448 / 460

Prestige 2602HW Series User’s Guide
448 Appendix M Log Descriptions
The following table shows RFC-2408 ISAKMP payload types that the log displays. Please
refer to the RFC for detailed information on each type.
Log Commands
Go to the command interpreter interface ( Appendix J explains how to access and use the
commands).
Configuring What You Want the Prestige to Log
1
Use the sys logs load command to load the log setting buffer that allows you to configure
which logs the Prestige is to record.
2
Use sys logs category to view a list of the log categories.
Figure 274 Displaying Log Categories Example
3
Use sys logs category followed by a log category to display the parameters that are
available for the category.
Table 175 RFC-2408 ISAKMP Payload Types
LOG DISPLAY PAYLOAD TYPE
SA
Security Association
PROP
Proposal
TRANS
Transform
KE
Key Exchange
ID
Identification
CER
Certificate
CER_REQ
Certificate Request
HASH
Hash
SIG
Signature
NONCE
Nonce
NOTFY
Notification
DEL
Delete
VID
Vendor ID
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit ether wan
wlan ip bridge lan
radius 8021x dsp voiceradius 8021x
ras>