ZyXEL Communications Prestige 2602HW Series, User Manual

Page: 226 / 460

Prestige 2602HW Series User’s Guide
226 Chapter 20 Introducing the SMT
Figure 112 Initial Screen
20.2.2 Entering the Password
The login screen appears after you press [ENTER] , prompting you to enter the password, as
shown below.
For your first login, enter the default password “ 1234 ”. As you type the password, the screen
displays an “ X ” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your
Prestige will automatically log you out and display a blank screen. If you see a blank screen,
press
[ENTER] to bring up the login screen again.
Figure 113 Password Screen
20.2.3 Procedure for SMT Configuration via Telnet
The following procedure details how to telnet into your Prestige.
1 In Windows, click Start (usually in the bottom left corner), Run and then type "
telnet
192.168.1.1
" (the default IP address) and click OK .
2 Enter “
1234
” in the Password field.
3 After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period)
after you log in, your Prestige will automatically log you out. You will then have to telnet into
the Prestige again.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:A0:C5:7A:86:D5
initialize ch =1, ethernet address: 00:A0:C5:7A:86:D6
initialize ch =2, ethernet address: 00:A0:C5:7A:86:D7
initialize ch =3, ethernet address: 00:00:00:00:00:00
AUX port init . done
Modem init . inactive
Press ENTER to continue...
Enter Password : XXXX