ZyXEL Communications Prestige 2602HW Series User Manual Download Page 179

Page: 179 / 460

Prestige 2602HW Series User’s Guide

Chapter 14 Firewall Configuration

179

FTP(TCP:20.21)

File Transfer Program, a program to enable fast transfer of files,

including large files that may not be possible by e-mail.

H.323(TCP:1720)

Net Meeting uses this protocol.

HTTP(TCP:80)

Hyper Text Transfer Protocol - a client/server protocol for the world

wide web.

HTTPS

HTTPS is a secured http session often used in e-commerce.

ICQ(UDP:4000)

This is a popular Internet chat program.

IPSEC_TRANSPORT/

TUNNEL(AH:0)

The IPSEC AH (Authentication Header) tunneling protocol uses this

service.

IPSEC_TUNNEL(ESP:0)

The IPSEC ESP (Encapsulation Security Protocol) tunneling protocol

uses this service.

IRC(TCP/UDP:6667)

This is another popular Internet chat program.

MSN Messenger(TCP:1863)

Microsoft Networks’ messenger service uses this protocol.

MULTICAST(IGMP:0)

Internet Group Multicast Protocol is used when sending packets to a

specific group of hosts.

NEWS(TCP:144)

A protocol for news groups.

NFS(UDP:2049)

Network File System - NFS is a client/server distributed file service that

provides transparent file-sharing for network environments.

NNTP(TCP:119)

Network News Transport Protocol is the delivery mechanism for the

USENET newsgroup service.

PING(ICMP:0)

Packet INternet Groper is a protocol that sends out ICMP echo

requests to test whether or not a remote host is reachable.

POP3(TCP:110)

Post Office Protocol version 3 lets a client computer get e-mail from a

POP3 server through a temporary connection (TCP/IP or other).

PPTP(TCP:1723)

Point-to-Point Tunneling Protocol enables secure transfer of data over

public networks. This is the control channel.

PPTP_TUNNEL(GRE:0)

Point-to-Point Tunneling Protocol enables secure transfer of data over

public networks. This is the data channel.

RCMD(TCP:512)

Remote Command Service.

REAL_AUDIO(TCP:7070)

A streaming audio service that enables real time sound over the web.

REXEC(TCP:514)

Remote Execution Daemon.

RLOGIN(TCP:513)

Remote Login.

RTELNET(TCP:107)

Remote Telnet.

RTSP(TCP/UDP:554)

The Real Time Streaming (media control) Protocol (RTSP) is a remote

control for multimedia on the Internet.

SFTP(TCP:115)

Simple File Transfer Protocol.

SMTP(TCP:25)

Simple Mail Transfer Protocol is the message-exchange standard for

the Internet. SMTP enables you to move messages from one e-mail

server to another.

SNMP(TCP/UDP:161)

Simple Network Management Program.

SNMP-TRAPS (TCP/

UDP:162)

Traps for use with the SNMP (RFC:1215).

Table 51

Predefined Services (continued)

SERVICE

DESCRIPTION

Summary of Contents for Prestige 2602HW Series













































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 2602HW Series

Reviews:

Related manuals for Prestige 2602HW Series

Brands by name

Popular brands

ZyXEL Communications Prestige 2602HW Series, User Manual

Search results

Summary of Contents for Prestige 2602HW Series

Reviews:

Related manuals for Prestige 2602HW Series

Brands by name

Popular brands