ZyXEL Communications Prestige 2602HW Series User Manual Download Page 215

Page: 215 / 460

Prestige 2602HW Series User’s Guide

Chapter 19 Maintenance

215

The following table describes the fields in this screen.

Table 62

System Status

LABEL

DESCRIPTION

System Status

System Name

This is the name of your Prestige. It is for identification purposes.

ZyNOS Firmware

Version

This is the ZyNOS firmware version and the date created. ZyNOS is ZyXEL's

proprietary Network Operating System design.

DSL FW Version

This is the DSL firmware version associated with your Prestige.

Standard

This is the standard that your Prestige is using.

WAN Information

IP Address

This is the WAN port IP address.

IP Subnet Mask

This is the WAN port IP subnet mask.

Default Gateway

This is the IP address of the default gateway, if applicable.

VPI/VCI

This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in

the first Wizard screen.

LAN Information

MAC Address

This is the MAC (Media Access Control) or Ethernet address unique to your

Prestige.

IP Address

This is the LAN port IP address.

IP Subnet Mask

This is the LAN port IP subnet mask.

DHCP

This is the WAN port DHCP role -

Server

Relay

(not all Prestige models) or

None

DHCP Start IP

This is the first of the contiguous addresses in the IP address pool.

DHCP Pool Size

This is the number of IP addresses in the IP address pool.

WLAN Information

ESSID

This is the descriptive name used to identify the Prestige in the wireless LAN.

Channel

This is the channel number used by the Prestige now.

WEP

This displays the status of WEP data encryption.

Voice Information

SIP1/SIP 2

This is the SIP account configured on the Prestige

SIP Registration

Status

This is the SIP registration status of the SIP account.
This field displays

Registered

when the Prestige has successfully registered the

SIP account with the SIP register server.
This field displays

Not

Registered

when the Prestige has not successfully

registered the SIP account with the SIP register server.

Register

to have the Prestige attempt to register the SIP account with the

SIP register server.
Click

Unregister

to delete the SIP account's registration on the SIP register

server. This removes the SIP registration server's SIP identity-to-IP address (or

domain name) mapping for this SIP account, it does not cancel your SIP account.

Used Port

This field displays the Prestige’s listening port for SIP traffic on this SIP account.

Show Statistics

Click

Show Statistics

to see the performance statistics such as number of

packets sent and number of packets received for each port.

Summary of Contents for Prestige 2602HW Series













































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 2602HW Series

Reviews:

ZyXEL Communications Prestige 2602HW Series, User Manual, Page: 215 / 460

Search results

Summary of Contents for Prestige 2602HW Series

Reviews: