ZyXEL Communications Prestige 2602HW Series User Manual Download Page 216

Page: 216 / 460

Prestige 2602HW Series User’s Guide

216

Chapter 19 Maintenance

19.2.1 System Statistics

Click

Show Statistics

in the

System Status

screen to open the following screen. Read-only

information here includes port status and packet specific statistics. Also provided are "system
up time" and "poll interval(s)". The

Poll Interval(s)

field is configurable.

Figure 103

System Status: Show Statistics

The following table describes the fields in this screen.

Table 63

System Status: Show Statistics

LABEL

DESCRIPTION

System up Time

This is the elapsed time the system has been up.

CPU Load

This field specifies the percentage of CPU utilization.

LAN or WAN Port

Statistics

This is the WAN or LAN port.

Link Status

This is the status of your WAN link.

Upstream Speed

This is the upstream speed of your Prestige.

Downstream Speed This is the downstream speed of your Prestige.

Node-Link

This field displays the remote node index number and link type. Link types are

PPPoA, ENET, RFC 1483 and PPPoE.

Interface

This field displays the type of port.

Summary of Contents for Prestige 2602HW Series













































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 2602HW Series

Reviews:

Related manuals for Prestige 2602HW Series

Brands by name

Popular brands

ZyXEL Communications Prestige 2602HW Series, User Manual

Search results

Summary of Contents for Prestige 2602HW Series

Reviews:

Related manuals for Prestige 2602HW Series

Brands by name

Popular brands