ZyXEL Communications Prestige 2602HW Series User Manual Download Page 318

Page: 318 / 460

Prestige 2602HW Series User’s Guide

318

Chapter 34 System Information and Diagnosis

Figure 198

Menu 24.2.1 System Maintenance: Information

The following table describes the fields in this menu.

34.3.2 Console Port Speed

You can set up different port speeds for the console port through

Menu 24.2.2 – System

Maintenance – Console Port Speed

. Your Prestige supports 9600 (default), 19200, 38400,

57600 and 115200 bps. Press [

SPACE BAR

] and then

[ENTER]

to select the desired speed in

menu 24.2.2, as shown in the following figure.

Menu 24.2.1 - System Maintenance - Information

Name:

Routing: IP

ZyNOS F/W Version: V3.40(MF.0) | 07/16/2004

ADSL Chipset Vendor: TI AR7 01.01.00.00

Standard: Multi-Mode

LAN

Ethernet Address: 00:a0:c5:78:de:8d

IP Address: 192.168.1.1

IP Mask: 255.255.255.0

DHCP: Server

Press ESC or RETURN to Exit:

Table 105

Menu 24.2.1 System Maintenance: Information

FIELD

DESCRIPTION

Name

Displays the system name of your Prestige. This information can be changed in

Menu 1 – General Setup

Routing

Refers to the routing protocol used.

ZyNOS F/W Version

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware

version. ZyNOS is a registered trademark of ZyXEL Communications

Corporation.

ADSL Chipset

Vendor

Displays the vendor of the ADSL chipset and DSL version.

Standard

This refers to the operational protocol the Prestige and the DSLAM (Digital

Subscriber Line Access Multiplexer) are using.

LAN

Ethernet Address

Refers to the Ethernet MAC (Media Access Control) of your Prestige.

IP Address

This is the IP address of the Prestige in dotted decimal notation.

IP Mask

This shows the subnet mask of the Prestige.

DHCP

This field shows the DHCP setting (None, Relay or Server) of the Prestige.

Summary of Contents for Prestige 2602HW Series













































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 2602HW Series

Reviews:

ZyXEL Communications Prestige 2602HW Series, User Manual, Page: 318 / 460

Search results

Summary of Contents for Prestige 2602HW Series

Reviews: