ZyXEL Communications Prestige 2602HW Series, User Manual, Page: 447 / 460

Prestige 2602HW Series User’s Guide
Appendix M Log Descriptions 447
Table 171 RTP Logs
LOG MESSAGE DESCRIPTION
Error, RTP init fail
The initialization of an RTP session failed.
Error, Call fail: RTP
connect fail
A VoIP phone call failed because the RTP session could not be
established.
Error, RTP connection
cannot close
The termination of an RTP session failed.
Table 172 FSM Logs: Caller Side
LOG MESSAGE DESCRIPTION
VoIP Call Start Ph[Phone
Port Number] <- Outgoing
Call Number
Someone used a phone connected to the listed phone port to
initiate a VoIP call to the listed destination.
VoIP Call Established
Ph[Phone Port] -> Outgoing
Call Number
Someone used a phone connected to the listed phone port to
make a VoIP call to the listed destination.
VoIP Call End Phone[Phone
Port]
A VoIP phone call made from a phone connected to the listed
phone port has terminated.
Table 173 FSM Logs: Callee Side
LOG MESSAGE DESCRIPTION
VoIP Call Start from
SIP[SIP Port Number]
A VoIP phone call came to the Prestige from the listed SIP
number.
VoIP Call Established
Ph[Phone Port] <- Outgoing
Call Number
A VoIP phone call was set up from the listed SIP number to the
Prestige.
VoIP Call End Phone[Phone
Port]
A VoIP phone call that came into the Prestige has terminated.
Table 174 Lifeline Logs
LOG MESSAGE DESCRIPTION
PSTN Call Start
A PSTN call has been initiated.
PSTN Call End
A PSTN call has terminated.
PSTN Call Established
A PSTN call has been set up.