ZyXEL Communications Prestige 100, User Manual

Page: 66 / 130

54 Remote Node Configuration
•
DOVBS - (For North America only) The Prestige will place
56Kbps Data Over Voice Bearer Service (DOVBS) call.
Some phone companies in North America charge less if
calls are made with DOVBS option.
17. Telco Options: Allocated Budget (min) - This field will set a
‘budget’ outgoing call time for the Remote Node. The default
for this field is 0 for no budget control.
18. Telco Options: Period (hr) - This field will set the time
interval to reset the above outgoing call budget control.
19. Session Option: Input Filter Sets, Output Filter Sets and
Call Filter Sets - In these fields, select which filter set(s) you
would like to implement to filter the incoming and outgoing
traffic between this Remote Node and the Prestige. You can
choose from 12 different filter sets. In addition, you can link up
to 4 filter sets together for further customization (e.g., ‘1, 5, 9,
12’). Please note that spaces and ‘,’ are accepted in this field.
For more information on customizing your filter sets, please see
Chapter 8. The default is blank, i.e., no filters defined.
20. Session Option: Idle Timeout (sec) - This value specifies the
number of idle seconds that elapses before the Remote Node is
automatically disconnected. Idle seconds is the period of time
where no data is passed between the Remote Node and your
Prestige. Administrative packets such as RIP are not counted as
data. The default is 300 seconds (5 minutes).
Once you have completed filling in ‘Menu 11.1 - Remote Node
Profile’, press ENTER at the message: ‘Press ENTER to Confirm
...’ to confirm your selections, or press ESC at any time to cancel
your selections.