12 Before You Begin
•
Route IP Field - For Internet access, you will need to enable
the Route IP Field. Please see Chapter 4 for more details on
configuring your Prestige for Internet access.
You have now collected all of the general setup information you
need. Please make sure that you have entered all the values onto
the worksheet before proceeding to the next section.
Collecting ISDN Phone Line Information
After you have successfully installed the ISDN phone line or if you
already have one installed, you need to use the ISDN line
information to complete the worksheet and configure your
Prestige. Your telephone company can give you the following
information to configure the Prestige:
Switch Type
Geography
No of Phone #'s
No of SPIDs
AT&T 5ESS NI-1
North America
2
2
AT&T 5ESS Point to
Point
North America
1
0
AT&T 5ESS Multipoint
North America
2
2
Northern Telecom NI-1
North America
2
2
Northern Telecom
Custom
North America
2
2
DSS1
Europe, Asia
2
N/A
1TR6
Germany
2
N/A
•
Switch Type - This is the type of switch used by your
telephone company. Check with your telephone company and
choose the appropriate option on the worksheet. For North
America, select your ISDN switch type. For DSS1 and 1TR6,
verify this field to make sure that you have the proper firmware
loaded.
Summary of Contents for Prestige 100
