ZyXEL Communications Prestige 100, User Manual

Page: 77 / 130

Dial-In Configuration 65
sets, please see Chapter 8 on Filter Configuration. The default
is blank, i.e., no filters.
14. Session Options: Idle Timeout - This value is the number of
idle seconds that elapses before the dial-in user is automatically
disconnected. Idle Timeout is the period of time when there is
no data traffic between the dial-in user or Remote Node and
the Prestige. This field will only be used if the Recv. Authen is
set to ‘None’ and the call is not mapped to any Remote Node
or Remote Dial-in User or the Prestige calls back to the Remote
Dial-in User.
Once you have completed filling in ‘Menu 13 - Default Dial-in
Setup’, press ENTER at the message: ‘Press ENTER to Confirm
...’ to save your selections, or press ESC at any time to cancel your
selections.
Dial-In Users Setup
The following steps describe the setup procedure for adding a
Remote Dial-in User. From the Main Menu, enter ‘14’ to go to ‘14.
Dial-in User Setup’ is shown below:
Figure 6-4 Menu 14 - Dial-in User Setup