Chapter 12 Firewall
PMG2006-T20A User’s Guide
100
Figure 65
Access Control: Add/Edit
The following table describes the labels in this screen.
Table 47 Access Control: Add/Edit
LABEL
DESCRIPTION
Filter Name
Enter a descriptive name of up to 16 alphanumeric characters, not including spaces,
underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-only if you are editing the
ACL rule.
Order
Select the order of the ACL rule.
Select Source
Device
Select the source device to which the ACL rule applies. If you select
Specific IP Address
, enter
the source IP address in the field below.
Source IP
Address
Enter the source IP address.
Select
Destination
Device
Select the destination device to which the ACL rule applies. If you select
Specific IP Address
,
enter the destiniation IP address in the field below.
Destination IP
Address
Enter the destination IP address.
IP Type
Select whether your IP type is
IPv4
or
IPv6
.
Select Service
Select the transport layer protocol that defines your customized port from the drop-down list
box.
If you want to configure a customized protocol, select
Specific Service
.
Protocol
This field is displayed only when you select
Specific Protocol
in
Select Protocol
.
Choose the IP port (
TCP/UDP
,
TCP
,
UDP
,
ICMP
, or
ICMPv6
) that defines your customized port from
the drop-down list box.
Custom Source
Port
This field is displayed only when you select
Specific Protocol
in
Select Protocol
.
Enter a single port number or the range of port numbers of the source.
Custom
Destination Port
This field is displayed only when you select
Specific Protocol
in
Select Protocol
.
Enter a single port number or the range of port numbers of the destination.
Summary of Contents for PMG2006-T20A
Page 11: ...11 PART I User s Guide ...
