Chapter 9 Network Address Translation (NAT)
PMG2006-T20A User’s Guide
73
Note: Port 7574 is for TR-069 connection.
9.2.1 Add/Edit Port Forwarding
Click
Add New Rule
in the
Port Forwarding
screen or click the
Edit
icon next to an existing rule to open
the following screen.
Figure 39
Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 25 Port Forwarding: Add/Edit
LABEL
DESCRIPTION
Active
Select to enable or disable the rule.
Service Name
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
WAN Interface
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
Start Port
Enter the original destination port for the packets.
To forward only one port, enter the port number again in the
End Port
field.
To forward a series of ports, enter the start port number here and the end port number in the
End
Port
field.
End Port
Enter the last port of the original destination port range.
To forward only one port, enter the port number in the
Start
Port
field above and then enter it
again in this field.
To forward a series of ports, enter the last port number in a series that begins with the port
number in the
Start Port
field above.
Translation Start
Port
This shows the port number to which you want the PMG2006-T20A to translate the incoming port.
For a range of ports, enter the first number of the range to which you want the incoming ports
translated.
Summary of Contents for PMG2006-T20A
Page 11: ...11 PART I User s Guide ...
