PMG2006-T20A User’s Guide
132
C
HAPTER
23
Remote Management
23.1 Overview
Remote management controls through which interface(s), which services can access the PMG2006-
T20A.
Note: The PMG2006-T20A is managed using the Web Configurator.
23.2 The MGMT Services Screen
Use this screen to configure through which interface(s), which services can access the PMG2006-T20A.
You can also specify the port numbers the services must use to connect to the PMG2006-T20A. Click
Maintenance > Remote Management > MGMT Services
to open the following screen.
Figure 92
Maintenance > Remote Management > MGMT Services
The following table describes the fields in this screen.
Table 73 Maintenance > Remote Management > MGMT Services
LABEL
DESCRIPTION
WAN Interface
used for services
Select
Any_WAN
to have the PMG2006-T20A automatically activate the remote management
service when any WAN connection is up.
Select
Multi_WAN
and then select one or more WAN connections to have the PMG2006-T20A
activate the remote management service when the selected WAN connections are up.
service
This is the service you may use to access the PMG2006-T20A.
LAN/WLAN
Select the
Enable
check box for the corresponding services that you want to allow access to the
PMG2006-T20A from the LAN/WLAN.
Summary of Contents for PMG2006-T20A
Page 11: ...11 PART I User s Guide ...
